The War on Shower Mold

Strategies for Removal and Prevention of Mold on Stone and Tile Showers

Mold growth in showers is a common issue in many households. This unsightly and potentially harmful problem can arise from a variety of factors and understanding these can help in both treating and preventing it. Here’s an overview of what causes mold to grow in showers and how to effectively remove and prevent it.

Causes of Mold Growth in Showers

Moisture and Humidity: The primary cause of mold growth in showers is the high level of moisture and humidity. Showers, being regularly wet and often poorly ventilated, create an ideal environment for mold spores to thrive.

Lack of Ventilation: Inadequate ventilation in bathrooms leads to moisture accumulation. Without proper air circulation, the dampness from showers and baths lingers, promoting mold growth.

Warm Temperatures: Mold typically thrives in warm conditions. The heat combined with humidity in a bathroom is an ideal breeding ground for mold.

Organic Material: Soap scum, body oils, and other organic materials present in showers serve as a food source for mold.

Poor Cleaning Habits: Infrequent or inadequate cleaning can allow mold spores to settle and grow in shower crevices, grout, and caulking.

How to Remove Mold

Commercial Mold Cleaners: There are numerous mold removal products available. Ask us for specific recommendations. Always follow the instructions and ensure proper ventilation when using these chemicals.

Natural Solutions: For a more natural approach, solutions like vinegar, baking soda, or hydrogen peroxide can be effective. For instance, spraying vinegar on the affected area, leaving it for an hour, and then scrubbing can remove mold. Vinegar should not be used on natural stone showers as it can result in etching (dulling) the stone.

Protective Gear: When cleaning mold, wear protective gear like gloves and a mask to avoid inhaling spores or irritating your skin.

Thorough Cleaning: Ensure that all areas, especially grout and caulking, are scrubbed thoroughly to remove all mold.

Preventing Mold Growth

Improve Ventilation: Use an exhaust fan during and after showers to reduce humidity. If possible, open a window to allow for air circulation.

Regular Cleaning: Frequent cleaning can prevent mold spores from settling. Use a squeegee after showers to remove excess water from the walls and floor.

Control Humidity: Keeping the bathroom humidity below 50% can significantly reduce the likelihood of mold growth. Dehumidifiers can be effective in this regard.

Seal Grout Lines: Sealing grout lines can prevent moisture from seeping in and becoming a breeding ground for mold.

Use Mold-Resistant Products: Consider using mold-resistant shower curtains, and caulk designed to resist mold growth.

Dry Wet Items: Ensure that any wet items like towels or bathmats are dried out properly and not left in the bathroom.

Periodic Inspection and Maintenance: Regularly inspect areas prone to mold and address any moisture or leaks immediately.

The bottom line is mold in showers is primarily caused by the damp and humid environment typical of bathrooms. By understanding these causes, homeowners can take effective steps to remove existing mold and prevent its reoccurrence. Regular cleaning, improved ventilation, and controlling humidity are key strategies in maintaining a mold-free shower environment.


By Fred Hueston. This article is one of a series of articles written and published on behalf of Surface Care PRO Partners.